›
Please review the site Rules, Terms of Service, and Privacy Policy at your convenience. Rules, TOS, Privacy
Get familiar with the reaction system: Introducing the Reaction System

Xsim question

dynamodynamo
in DIY
Is there a way to get xsim to show individual driver phase like PCD?
Thanks

Comments

  • PWRRYDPWRRYD
    Yes.  Under curves select your individual driver.  Then just above the "smoothing" selection there is a check box for phase.
  • jhollanderjhollander
    Yes in the Fr graph, select each driver under the curves tab and click the phase box. I like to go back to the system curve and uncheck the phase box for the system phase.
     John H, btw forum has decided I don't get emails
  • PWRRYDPWRRYD
    Jinx
  • dcibeldcibel
    Select your driver under the curves menu, then check the box.
    I'm not deaf, I'm just not listening.
  • jhollanderjhollander
    identical time...go figure
     John H, btw forum has decided I don't get emails
  • dynamodynamo
    Ask and you shall receive, thanks much gentlemen 
Sign In or Register to comment.