›

Site Links

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Quick Links

Categories

In this Discussion

Who's Online (9)

Please review the site Rules, Terms of Service, and Privacy Policy at your convenience. Rules, TOS, Privacy
Get familiar with the reaction system: Introducing the Reaction System

Impedance variations in tweeters

duanebroduanebro
in DIY
I ran into this while testing drivers with LIMP:

Published fs is 1475. So the yellow line is right on. The second tweeter (green) has a higher fs. I also tested a pair of Dayton ND16 tweeters. And they had a similar graph/issue. Just at about 1k higher. What does this mean? Anything?

Comments

  • jr@macjr@mac
    No worries. 
    duanebroMzisserson
    I have a signature.
  • duanebroduanebro
    The kb drivers are right on btw!
  • MzissersonMzisserson
    I second JR. Also what I look for in tweeters is a second hump, or plateu just past fs as the Z is normalizing which usually means a leak somewhere. 

    Also, any squiggles after the FS which can show motor issues  
    duanebro
Sign In or Register to comment.