Home ›
Site Links
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Quick Links
Categories
Who's Online (5)
- a4eaudio 8:00PM
- Analogkid455 8:00PM
- ani_101 8:00PM
- johnny5jz 8:00PM
- silverD 8:00PM
Please review the site Rules, Terms of Service, and Privacy Policy at your convenience. Rules, TOS, Privacy
Get familiar with the reaction system: Introducing the Reaction System
Ooooh! New XO/DSP Unit coming soon . . .
This looks like the ticket --> https://www.minidsp.com/products/minidsp-in-a-box/minidsp-flex-eight
Just wish there was a compact multi-channel amp to go with it.
Comments
How compact or affordable?
I think the Topping PA5 looks as good as any other amp around $350 per 2 channels; although a bit limited in power. (80W/4ohms)
Hey TK - that ^ thing is only a 2 channel stereo amp - I am suggesting a 6 channel amp - 6 powered-outs for discrete drivers . . .
I have two of these on-hand waiting for me to build a chassis but keep holding-off due to lack of a good enclosure --> https://store.sure-electronics.com/product/613
Has anyone tried this chassis? --> https://www.circuitspecialists.com/rackmount-enclosure-et235b.html
Needs more ventilations for those ^ amps I think . . .
I haven’t seen any measurements of the Wondom modules.
The only DIY amps I have assembled since I stopped using class A/B have been Hypex UcD and nCore.
Buckeye Amps now assemble complete 2-8 channel amplifiers, that’s probably what I would recommend if I didnt want to build.
Look at the link I posted above and on the left you will see a menu with SPECS and PERFORMANCE data, TK - Let me know your thoughts.
I selected these overpowered (200 WPC) Class-D amps as I will not run them at high levels which should keep distortion-low . . .
The specs looks ok l couldn’t comment apart from what is published.
It’d be nice to see measurement from an independent third party.