Site Links
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Quick Links
Categories
In this Discussion
Who's Online (5)
- DrewsBrews 3:41PM
- kenrhodes 3:41PM
- rjj45 3:41PM
- technodanvan 3:41PM
- Tom_S 3:41PM
IowaDIY Swap Meet
I'll start:
I'll have at least the following for reduced prices...
Qty: 2 Dynavox 6.5" poly cone woofers - used like new NLA
Qty: 2 Tang Band 6.5" poly cone woofers - new NLA
Qty: 2 HiVi M5A - new NLA
Qty: 2 HiVi F5 - new $30
Qty: 2 Seas 27TFFC - used Scott S
Qty: 5 Beastmode - used like new MattV one $25/pr
Qty: 4 SB Acoustics SB12PFCR25-08 - used like new $40/4
Qty: 2 SB Acoustics SB12PFCR25-04 - used like new $20
Qty: 1 Parts to build "multimedia" subwoofer, 1x Tang Band 6.5" subwoofer, 1x Dayton Designer Series aluminum 8" PR, 1x Dayton 2.1 channel amp MCA2250E. Prefer to sell this as a kit. Cabinet design here: https://diy.midwestaudio.club/discussion/2186/the-malley-a-small-powered-subwoofer/p1 All parts in new condition, only amp has original packaging Driver and PR are NLA, amp remains. Amp= $70
Qty: 1 Dayton 25W plate amp $20
I know this is early, but I want to give attendees first crack. Don't be afraid to shoot me offers, I have pricing in mind for the table. Keep in mind shipping isn't cheap so I am not particularly interested in going down that road just yet.
Comments
Adding
Qty: 2 Scan Speak built 8 ohm XXLS subwoofers. These are from the Aerial buyout a few years ago. Nice drivers. I have four, need two.
JR: would you put my name on one of the Beastmodes please.
I'll be bringing some leftover veneer (walnut and jatoba) and veneering supplies. I'll also have drivers with as well, I'll post those up after I sort through the stash.
JR: I could use the pair of 27TFFC's. I think they will drop onto the SEOS8 waveguides and the rising top end might be useful in that application.
Sehlin Sound Solutions
Bump since Iowa is two short months away.
Yikes. I better get busy.
https://www.jfcomponents.com/
Yeah me too! Unless I only bring some naked PB boxes with rectangular $4.88 buyout tweeters
Yours. I will let you know pricing when we get together. I used them in a waveguide for the same reason.
Dayton WT3 $15
UMM mic $40
https://diy.midwestaudio.club/discussion/2372/three-gallons-of-components#latest
I am interested in the DATS, if you don't mind shipping it.
If it doesn't move at the swap meet, I will ship it your way for $40.
OK, just let me know after Iowa.
Correction, only have a WT3. Dunno why I thought I had a DATS.
A Tenma 72-8155 LC meter, works as it should. $25
Updated with pricing. Scott and Matt check your PM.
Peerless 830875 Qty: 4 NLA
Wow someone buy those. Before I have to add them to my hoard.
https://www.jfcomponents.com/
Ah crap why not.... I'll take those 830875's.
Thinking MTM with Da Beastmodes ftw!
Solid score sir !
Tang Band W3-1364SA Qty: 2 $40
Beston RT004A (bigass planars) Qty: 2 $100
...and that's it. Buy this stuff, good stuff at good prices.
This is what it all boxed up as. Free boxes to whomever buys this stuff.
Worth it, just for the boxes!
I might also have a lot of other drivers I will be hauling down for a good price. Stay tuned.
Bump. Buy this stuff, it helps to support our event.
Anything that doesn't sell here I will box up and ship to the lower 48. Rather not, so buy this stuff.