MW13P-4 has one of the most extended responses of any driver. Apart from the blip in the midrange; it’s near close to perfection, as far as a 5.25” driver is concerned.
Maybe it’s the tweeter that’s forcing your hand with the XO…
A few years ago I built the Revolution Mini by the late Jeff Bagby:
Check out his crossover; it only uses a few components:
@DanP said:
Damn bruh. That shape is sexy as hell! Nice job coming up with a brand new aesthetic, at least as far as I can remember!
Thanks Dan. This Satori 5 has been a pain so far, you guys use to sell a kit with the same driver did you find it hard to tune?
No it fell together pretty easy where we were crossing it. It did have a measurable 4-5dB dip in the response toward the top of its range (I don't remember the frequency) due to a surround resonance, but it was narrow band and we just left it alone. It's a really impressive driver. What's your z-offset on that tweeter now in the waveguide?
The offset on the woofer is still 0.12 as I tried to match the horn depth but I was a little off. Don’t get me wrong they sound great they measure well, I’m just being picky. I think I’m calling it-done. I usually like to take more time on the tuning but the show must go on.
Comments
Iowa2023.
https://www.jfcomponents.com/
MW13P-4 has one of the most extended responses of any driver. Apart from the blip in the midrange; it’s near close to perfection, as far as a 5.25” driver is concerned.
Maybe it’s the tweeter that’s forcing your hand with the XO…
A few years ago I built the Revolution Mini by the late Jeff Bagby:
Check out his crossover; it only uses a few components:
Here’s my measurements of it:
https://www.diyaudio.com/community/threads/2020-jeff-bagby-revolution-mini-sd.359083/
Kick ass looking speaker. Sweet.
No it fell together pretty easy where we were crossing it. It did have a measurable 4-5dB dip in the response toward the top of its range (I don't remember the frequency) due to a surround resonance, but it was narrow band and we just left it alone. It's a really impressive driver. What's your z-offset on that tweeter now in the waveguide?
The offset on the woofer is still 0.12 as I tried to match the horn depth but I was a little off. Don’t get me wrong they sound great they measure well, I’m just being picky. I think I’m calling it-done. I usually like to take more time on the tuning but the show must go on.
https://www.jfcomponents.com/
I simplified it. So won’t be all copper, but mostly copper.
https://www.jfcomponents.com/
https://www.jfcomponents.com/
Exposed crossovers FTW!!!😎
Like a woman at the beach got to show off the product.😆
https://www.jfcomponents.com/
JF Copper-Tone Oil Caps tm
Uh... I've been to enough Euro beaches to realize one Hottie equals 20 Nasties. Just sayin...
Yea, but that’s a good ratio (unfortunately) these days
I'm sure somewhere there is a forum of mostly women complaining that all they see at the beach are dad bods...
Some quick measurements at 24 inches before I tear these down and finish them for tomorrow 0deg,45deg,85deg.
https://www.jfcomponents.com/
Null Vert-15deg Gray v-up, Green v-down. Blue 0 deg
https://www.jfcomponents.com/
That's hawt
You got mad skillz, for sure!
Do you ever make something that doesn't look, and probably sounds, bloody amazing?
That would be a no. Fantastic stuff.
I have a room full of stuff that really hasn’t made the cut, but I enjoy different or arguable designs.
https://www.jfcomponents.com/
Yes. If you can hide a real 10” woofer in here somewhere, that would be noice…
IIRC, my statement also applies to you!
There not light in the bottom end now.
https://www.jfcomponents.com/
This is a great design! Can fit in any modern interior.