New Dayton Audio plate amps

jr@mac

...at least offer more than the single 3K crossover point, but to be honest - at $250 each there are some serious reasons to dismiss these entirely.

http://www.parts-express.com/electro-voice-zlx-12p-zlx-12-2-way-1000w-powered-pa-loudspeaker-with-dsp--245-5770

The Dayton has Bluetooth - whooptie shit. 

Try again, Dayton - perhaps include a 4 band PEQ, or allow the DSP module to accept custom curves. Otherwise, you are just contributing to a lot of guys building really mediocre sounding monitors. 

Mzisserson

Thd+N for the low-pass at rated at 1K just about says all I need to know about its quality. 

Since when is EQ called DSP? Man, im getting old. 

You would likely have better results with an off the shelf crossover in your speaker and an old school pioneer/kenwood/Marantz reciever from the 70's/80's

isaeagle4031

The Chinese company they are sourcing these from (same one as they new dayton dsp plate amps) is using the cheapest, most limited dsp they can get away with. In order to gain any other setting, they have to lose another. No real "value" in these either. 

D1PP1N

Seems like these are much better options for the money

https://www.minidsp.com/products/plate-amplifiers/pwr-ice125wd

http://www.parts-express.com/behringer-inuke-nu4-6000-6000-watt-four-channel-power-amplifier--248-6800

I found two 5 channel a/b amps used one for 270 and one for 350 shipped both is great shape and if you get a 2x8 mini dsp you can have a 2 way plus a sub channel with that combo.