Site Links
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Quick Links
Categories
In this Discussion
Who's Online (7)
- Analogkid455 11:27PM
- ani_101 11:27PM
- DaveFred 11:27PM
- DrewsBrews 11:27PM
- rjj45 11:27PM
- Silver1omo 11:27PM
- Steve_Lee 11:27PM
Please review the site Rules, Terms of Service, and Privacy Policy at your convenience. Rules, TOS, Privacy
Get familiar with the reaction system: Introducing the Reaction System
Speaker Remake RS28F with HiVi D8
in DIY
Reworking a set of speakers I did a few years ago. I am updating the Burn 'n Die speakers with the RS28F and waveguide and using the existing HiVi D8 woofer I had. I am also using the 10" Reference PR from Dayton.
Box layout for your viewing. I have measurements done and started working on the crossover and here is what I have come up with.
I am getting the same results from XSim so I think I am doing everything about right.
Looking at the overall response, everything looks right with the phase and response. I think the rise in the lower range has to do with how I did the blending for the woofer.
Do I need to worry about the impedance spikes near the crossover region and if so what would be the best way to get rid of them?
I am out of town all week for work so I will have to wait until this weekend before I can mockup a XO for listening.
Here is a link to my dropbox that has all the measurement files
https://drive.google.com/open?id=12So1V4QJWCL1FmNpc5e-vOCJ0TFc15vW
Let me know what you guys think.
Box layout for your viewing. I have measurements done and started working on the crossover and here is what I have come up with.
I am getting the same results from XSim so I think I am doing everything about right.
Looking at the overall response, everything looks right with the phase and response. I think the rise in the lower range has to do with how I did the blending for the woofer.
Do I need to worry about the impedance spikes near the crossover region and if so what would be the best way to get rid of them?
I am out of town all week for work so I will have to wait until this weekend before I can mockup a XO for listening.
Here is a link to my dropbox that has all the measurement files
https://drive.google.com/open?id=12So1V4QJWCL1FmNpc5e-vOCJ0TFc15vW
Let me know what you guys think.
Comments
That did it John, I am just a little too ambitious with the bass.