›
Please review the site Rules, Terms of Service, and Privacy Policy at your convenience. Rules, TOS, Privacy
Get familiar with the reaction system: Introducing the Reaction System

Crossover prototype board?

hifisidehifiside
in DIY
Anyone have a good idea on a voicing board? Something with all kinds of values that I can just use jumpers on. I’m about $30 deep this month breaking cap leads off. I searched but didn’t find any discussions in here.  Thanks!
Tagged:

Comments

  • 6thplanet6thplanet

    I bought a bunch of those terminals, laid them out in the crossover outline, then easy swappy components.
  • hifisidehifiside
    Good idea. Never thought of it like that.
      Thanks!
  • kenrhodeskenrhodes
    Wago connectors work very well. 
    rjj45
  • jhollanderjhollander
    I like the wago idea.  I also like soldering just the ends without twisting the leads.  Generally I'm not bending the leads much and I'm guaranteed of a good connection   I use a euro terminal strip for connecting the prototype x-o to the speaker leads.
     John H, btw forum has decided I don't get emails
  • Ron_ERon_E
    I use wire nuts. 
  • dcibeldcibel
    edited January 2020
    I use DSP. With a little work you can get a miniDSP to produce a very close match to the passive crossover transfer function, or with SoundEasy you can simply simulate the exact transfer function in software, using your PC as a DSP.
    I'm not deaf, I'm just not listening.
Sign In or Register to comment.