›
Please review the site Rules, Terms of Service, and Privacy Policy at your convenience. Rules, TOS, Privacy
Get familiar with the reaction system: Introducing the Reaction System

2.75 inch port tube?

jhollanderjhollander
in DIY

I used up the last of my 2.75 inch cardboard tubes. I have 2.5 inch and 3 inch but would like to find something less than 3 inch. Anyone have a source?

 John H, btw forum has decided I don't get emails
Tagged:

Comments

  • Ron_ERon_E
    edited November 2022

    How long do you need? I have a 3D printer.

  • jhollanderjhollander

    About 8 inches long.

     John H, btw forum has decided I don't get emails
  • Ron_ERon_E

    If I had 8 inches I'd be king. I can print something that big. How soon do you need it?

    Ron

    hifisideEd_PerkinsNicholas_23Steve_Lee
  • jhollanderjhollander
    edited November 2022

    Ron, thanks but hold off for a bit. I've got another idea (slot port).

    Also, 3-inch dia PVC pipe port length will fit in the cabinet which is the back up.

    edited this sentence

     John H, btw forum has decided I don't get emails
  • tajanestajanes
    edited November 2022

    https://www.estreetplastics.com/Acrylic-Tube-p/et0300027524.htm

    I recently ordered two 11 ⅞ length for my current project. They cut down nicely on my table saw (supported / tape between two small wood pieces), cut inside at 30 degrees. I couldn't find cardboard in that diameter.

    Steve_Lee
Sign In or Register to comment.