It looks like you're new here. If you want to get involved, click one of these buttons!
After hearing the SB12PFCR25-4 at InDIYana with no filtering whatsoever, I was highly impressed and offered to by them from Mark on the spot! I knew that they would make a great little speaker for my wife's new office. Started work on the cabinets yesterday. True 1/2" BBply from Menards. miters on the shell and back. She has decided on simple black scheme with sparkle and since I still have some left over from my nieces speaker, win-win. The enclosures are sitting at 6.5w x 11h x 9d for an internal volume of 5.6L, 0.20 cu ft with a 1.5" port, 6" long for an Fb of 58 and F3/6/10 at 51/45/40. No sub for this application and I will probably use only 2-3db of BSC due to location (desk top, close prox to wall, port on baffle.
Link to woofer:
As for the tweeter, I am undecided and will probably try a couple. In the inventory, I have a pr of Airborne RT20021s:
A pr of Peerless DX20BF00-04s
A pr of Beston RT003Cs:
A pr of SB26STCNs (way over kill!)
and a pr of Dayton ND20FA-6
I am leaning toward either the airborne or Peerless. Haven't seen anyone using the Airborne. Little more challenge with the crossover but should work out ok. The Peerless I think is a bit of a hidden gem if the factory graph is accurate.
Should have some more time in the next few days to cut a couple of test baffles to try out.
I can finally get back into the shop post surgery and recovery and have already built these and a short tower for a car audio company! More on those soon as well.
Kallah is Hebrew for bride. This is how I refer to my wife; always my bride.