@joeybutts said:
That means surface mounted, correct?
Means the drivers screws are at 0, 90, 180, and 270 deg. I also prefer the way you mounted yours and always do with 4 screw drivers. When it comes to drivers with 6 screws it depends on whether they have truncated frames and if I want to use the narrower profile for a narrower baffle width. With 8 screw drivers I still prefer the way you mounted yours, not having a screw right at the top and bottom. I have seen diy guys and commercial speakers done both ways so I guess it's personal preference...
Eww..... Yes, I always mount at 45's for 4 screw unless for some reason forced not. Something visually weird to me with screws on the vertical midline.
Got it back and two xovers to try, gonna order parts this week and hopefully have it up and running by the end of the month! The enclosure is a bit small for the woofers on paper but my size constraint was specific, we'll see how the extension goes, but hopefully everything else is smooth and pleasing.
Comments
But many people call KennyK, Kenny.
I wasn't sure if that is who was being referred to.
Yeah, generally yes. You are Ken, and a wonderful Ken you are!
Finally getting shipped off for a xover!
Please replacethe woofer screws with black
Otherwise very nice looking project.
oxide screws
They will be, only fitting screws I had at the moment. 🤣
Thanks!
Hope this crossover guy is better than the last...
As long as it sounds good, got plenty of time😊😊
...at least they aren't cardinal mounted.
InDIYana Event Website
That means surface mounted, correct?
Means the drivers screws are at 0, 90, 180, and 270 deg. I also prefer the way you mounted yours and always do with 4 screw drivers. When it comes to drivers with 6 screws it depends on whether they have truncated frames and if I want to use the narrower profile for a narrower baffle width. With 8 screw drivers I still prefer the way you mounted yours, not having a screw right at the top and bottom. I have seen diy guys and commercial speakers done both ways so I guess it's personal preference...
Eww..... Yes, I always mount at 45's for 4 screw unless for some reason forced not. Something visually weird to me with screws on the vertical midline.
Yup
5 screws???
https://cdn.mos.cms.futurecdn.net/5kY2hDE8jeEddxFaCVP5RM-970-80.jpg.webp
Got it back and two xovers to try, gonna order parts this week and hopefully have it up and running by the end of the month! The enclosure is a bit small for the woofers on paper but my size constraint was specific, we'll see how the extension goes, but hopefully everything else is smooth and pleasing.