I don't have that value, but I have most others. Basically bought out the stock of high value NPE when Meniscus closed down.
330uF polarized, those I have.
That first one is way too pretty for a boombox I'm gonna drag around work. Have the w5-1138 in the cart but thought I'd try to recycle something first plus it's still a little too nice for the jobsite.
Looking for just the woofer? What do you have for full range / mid tweet? I have LOTS of speakers a few 2.1 plate amps and a cnc. I REALLY need to thin the heard (pun intended).
Ken, it's for a bluetooth work radio. nd91/nd16fa with a dayton kabd 2x30watt amp. Decent drivers but nothing fancy cause there's an excellent chance it's going to get beat to $hit or possibly even disintegrate if it hits the floor after falling off a crane. My last pry bar hit the concrete floor hard enough, it bent.
That tcp does look promising in a small package and it's dirt cheap. Looks like I'll put a couple of them in the cart along with another amp. The kabd can drive/crossover/dsp the upper range and still output independent crossover/dsp line level outputs for the sub amp. Pretty nifty.
Gotta add more stuff to the cart for free shipping ...
Comments
I've got 300s
I don't have any NPs that big. I think I top out at 47uF.
I've got some 470s also when I was doing passive assist.
It's for a notch, so three parallel/ 990uF total.
I found one more, so really only need two more.
I bet most 1000uf measures ~990uf actual.
I don't have that value, but I have most others. Basically bought out the stock of high value NPE when Meniscus closed down.
330uF polarized, those I have.
InDIYana Event Website
Someone have a pair, or possibly single, small sub that would work in a bluetooth radio?
https://loudspeakerdatabase.com/TangBand/W5-876SD
I think I have 8 new
https://www.parts-express.com/Tang-Band-W5-1138SMF-5-1-4-Paper-Cone-Subwoofer-Speaker-264-917?quantity=1&srsltid=AfmBOoq2rL3QtbgZKLnXZwgIyWLcTMMwJOM0xCu4NpHVgyL8oua5NUIc
1 used
https://www.parts-express.com/4-x-6-High-Excursion-Poly-Cone-Woofer-with-Neodymium-Magnet-299-714?quantity=1
4 new
That first one is way too pretty for a boombox I'm gonna drag around work. Have the w5-1138 in the cart but thought I'd try to recycle something first plus it's still a little too nice for the jobsite.
That Dayton TCP thing makes for a great little bass driver. Cheap as shit, too.
Looking for just the woofer? What do you have for full range / mid tweet? I have LOTS of speakers a few 2.1 plate amps and a cnc. I REALLY need to thin the heard (pun intended).
Ken, it's for a bluetooth work radio. nd91/nd16fa with a dayton kabd 2x30watt amp. Decent drivers but nothing fancy cause there's an excellent chance it's going to get beat to $hit or possibly even disintegrate if it hits the floor after falling off a crane. My last pry bar hit the concrete floor hard enough, it bent.
That tcp does look promising in a small package and it's dirt cheap. Looks like I'll put a couple of them in the cart along with another amp. The kabd can drive/crossover/dsp the upper range and still output independent crossover/dsp line level outputs for the sub amp. Pretty nifty.
Gotta add more stuff to the cart for free shipping ...
Thanks guys.