@6thplanet said:
As John mentioned, audio is to low and back ground noise is a little high. Just trying to help you make better videos, great that your doing this🤘🏼
Thanks for the feedback as always, and I will be addressing those issues in the next video.
If anyone has a kit they want to share I’d love to make it available on my website. I’m working on the TMWW that JR made with Mac drivers.
Things required:
-Drivers used.
-Baffle size.
-Offsets
-Cabinet tune
-Crossover Specs
@hifiside said:
This is how I keep my girlish figure😆. Unload by hand 200 half sheets of 3/4” PB.
I see a speck of sawdust on the floor ???
Actually a very organized and clean workshop. Some of us, and I won't mention any names here, could learn a thing or two from this picture...
Comments
As John mentioned, audio is to low and back ground noise is a little high. Just trying to help you make better videos, great that your doing this🤘🏼
Thanks for the feedback as always, and I will be addressing those issues in the next video.
https://www.jfcomponents.com/
Threw down some Tricorn Black Satin Gallery Series over 3 coats of Fast Sanding Primer.
https://www.jfcomponents.com/
Gorgeous
What type of roller do you use for the primer?
I usually use the cheap foam rollers.
1/4 nap on this one for build.
https://www.jfcomponents.com/
So how'd the ribbon w/ MAC05 do?
????
https://www.jfcomponents.com/
on the left
I gave those to JR for his new build.
https://www.jfcomponents.com/
https://www.jfcomponents.com/
If anyone has a kit they want to share I’d love to make it available on my website. I’m working on the TMWW that JR made with Mac drivers.
Things required:
-Drivers used.
-Baffle size.
-Offsets
-Cabinet tune
-Crossover Specs
https://www.jfcomponents.com/
Making some gorilla coffins. 😳
https://www.jfcomponents.com/
The gorilla coffins in perspective. 😍
https://www.jfcomponents.com/
...better bolt down the chair
Maxell....
https://www.teepublic.com/t-shirts?query=maxell
InDIYana Event Website
We should ‘borrow’ the concept and put ‘Midwest Audio Club’ under the picture…
Now that’s a Tee I’d buy
Reminds me of..
https://techtalk.parts-express.com/forum/speaker-project-gallery/1491257-kitchen-cupboard-3-way-build
Made this as a FB cover photo a few years ago:
If Maxell wouldn't hand my ass to me, I would make arrangements for that. Great idea.
Time for more Wood!
https://www.jfcomponents.com/
This is how I keep my girlish figure😆. Unload by hand 200 half sheets of 3/4” PB.
https://www.jfcomponents.com/
I see a speck of sawdust on the floor ???
Actually a very organized and clean workshop. Some of us, and I won't mention any names here, could learn a thing or two from this picture...
1.5cu.ft ecosub kit bracing.🤔
https://www.jfcomponents.com/
There. That’s better.
https://www.jfcomponents.com/
Bracing art!! Love it!! Too bad nobody will get to see it once installed.
Perfect material for that sort of thing
Yeah, if you have access to a CNC router, curved interlocking bracing is soon to follow.
Sehlin Sound Solutions
Scott gets it.
https://www.jfcomponents.com/
No glue, yet. Interlocking brace.
https://www.jfcomponents.com/