@hifiside said:
This is how I keep my girlish figure😆. Unload by hand 200 half sheets of 3/4” PB.
I see a speck of sawdust on the floor ???
Actually a very organized and clean workshop. Some of us, and I won't mention any names here, could learn a thing or two from this picture...
I've had bad luck with particle board and router bits. Seems like there is so much other stuff in there other than wood. Seems like every sheet I cut causes significant wear. I have even had sparks coming off the tooling.
Looking great btw.
Yep PB is hard on tooling. I go through a bit about every 18-22 half sheets. Mdf is about 30-35 half sheets. I use a 75% feed rate to save as much bit life as possible.
i am lucky member of maker space that has awesome woodworking tools and shopbot 4x8 cnc router. i still need to learn a lot, especially cad design, but its fun and rewarding. sickening machine.
Comments
Time for more Wood!
https://www.jfcomponents.com/
This is how I keep my girlish figure😆. Unload by hand 200 half sheets of 3/4” PB.
https://www.jfcomponents.com/
I see a speck of sawdust on the floor ???
Actually a very organized and clean workshop. Some of us, and I won't mention any names here, could learn a thing or two from this picture...
1.5cu.ft ecosub kit bracing.🤔
https://www.jfcomponents.com/
There. That’s better.
https://www.jfcomponents.com/
Bracing art!! Love it!! Too bad nobody will get to see it once installed.
Perfect material for that sort of thing
Yeah, if you have access to a CNC router, curved interlocking bracing is soon to follow.
Sehlin Sound Solutions
Scott gets it.
https://www.jfcomponents.com/
No glue, yet. Interlocking brace.
https://www.jfcomponents.com/
https://www.jfcomponents.com/
Prototype temporary together for fitment.
https://www.jfcomponents.com/
https://www.jfcomponents.com/
I'm beginning to not like you - ha
Thinking up and fitting puzzle pieces- very nice !
I've had bad luck with particle board and router bits. Seems like there is so much other stuff in there other than wood. Seems like every sheet I cut causes significant wear. I have even had sparks coming off the tooling.
Looking great btw.
Yep PB is hard on tooling. I go through a bit about every 18-22 half sheets. Mdf is about 30-35 half sheets. I use a 75% feed rate to save as much bit life as possible.
https://www.jfcomponents.com/
If you list these nice end tables on your site I'm sure to buy one. That would look great by my arm chairs.
Pizza tables!
https://www.jfcomponents.com/
it looks awesome!
what kind of cnc do you have?
i am lucky member of maker space that has awesome woodworking tools and shopbot 4x8 cnc router. i still need to learn a lot, especially cad design, but its fun and rewarding. sickening machine.
4x4 standard CNC. From here.
https://www.avidcnc.com/
https://www.jfcomponents.com/
Mockup video.
https://www.jfcomponents.com/
Building some car audio cabinets for a local shop.
https://www.jfcomponents.com/
Those are misleading.
https://www.jfcomponents.com/
That's a tiny tweeter!
Beside Mac-04
https://www.jfcomponents.com/
Another show I missed. Just seen it on FB. Next year I guess. Sounds like all vendor room sold out.
https://www.southwestaudiofest.com/
https://www.jfcomponents.com/
In Iowa I mentioned that one and:
https://lonestaraudiofest.com/
Spring cleaning starts.
https://www.jfcomponents.com/
Intriguing design.
https://www.jfcomponents.com/
I'd like to see some measurements on that one. How big is it?