Been a rough couple of weeks here. Thanks for those orders everyone . I’m dealing with some cnc issues lately ever since my move. The machine likes to randomly stop in the middle of cutting, I might have a stepper motor going bad. So a few of those kits got out slower than usual. We will be starting our vintage audio eBay auction back up and I have some amps to dyno. I just need to stop worrying about the cnc and get moving.
On the CNC issue, what controller and software are you using for the gcode? I had a random estop issue appear and go away, and it started happening after I swapped out the battery on the motherboard of the comp. It turns out I had a corrupted Mach3 file. My problem was fixed when I restored the XML file to the previously archived file:
Brad posted up the corrected schematic for the Chacho project. Thanks for catching my error Ron.
I never self promote my projects ("You should build my xxx project") as I feel that's pretty tacky. But if anyone does build a pair I'm all ears to hear your impressions, good or bad. I have pretty thick skin and this is just a hobby for me so don't hold back on any criticisms.
I have a pair of the woofers already, so I ordered the tweeters and a few crossover parts for these. Not sure when I'll get to them, but it'll be a good project for one of the coming cold winter weekends.
We do match the tweeters since they can all be very different. The last batch only had one that was way off. I will also be building a set of The Chachos.
Comments
Been a rough couple of weeks here. Thanks for those orders everyone . I’m dealing with some cnc issues lately ever since my move. The machine likes to randomly stop in the middle of cutting, I might have a stepper motor going bad. So a few of those kits got out slower than usual. We will be starting our vintage audio eBay auction back up and I have some amps to dyno. I just need to stop worrying about the cnc and get moving.
https://www.jfcomponents.com/
Wish there was a "heart" or "care" emoticon here.... God bless, dude.
On the CNC issue, what controller and software are you using for the gcode? I had a random estop issue appear and go away, and it started happening after I swapped out the battery on the motherboard of the comp. It turns out I had a corrupted Mach3 file. My problem was fixed when I restored the XML file to the previously archived file:
https://machmotion.gitbooks.io/knowledge-base/content/restoring-xml-mach3-restore.html
Guess today is a good day.
https://www.jfcomponents.com/
If it wasn't for the tedious times, we we wouldn't enjoy the good times, Brad.
(Or so I tell myself . . .).
Brad posted up the corrected schematic for the Chacho project. Thanks for catching my error Ron.
I never self promote my projects ("You should build my xxx project") as I feel that's pretty tacky. But if anyone does build a pair I'm all ears to hear your impressions, good or bad. I have pretty thick skin and this is just a hobby for me so don't hold back on any criticisms.
Those are about the same price as the C-Notes, considering you have to buy a little wood to finish off the Chachos. I know which ones I would want...
Sehlin Sound Solutions
I have a pair of the woofers already, so I ordered the tweeters and a few crossover parts for these. Not sure when I'll get to them, but it'll be a good project for one of the coming cold winter weekends.
I'll probably get one pair of the kit.
We do match the tweeters since they can all be very different. The last batch only had one that was way off. I will also be building a set of The Chachos.
https://www.jfcomponents.com/
Had a random thought while perusing the site.. MTM with JDT tweeter and E5s? A pair of E5s models pretty nice in <.5cf ported.